Download for tl-wa850re v5
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(US)_V2_171228
|
|
Published Date: 2018-02-09
|
Language: English
|
File Size: 4.06 MB
|
|
Modifications and Bug Fixes:
Optimize the online-detection mechanism.
Notes:
For TL-WA850RE(US)_V2.0.
|
|
|
TL-WA850RE(US)_V2_171123
|
|
Published Date: 2017-11-23
|
Language: Multi-language
|
File Size: 4.04 MB
|
|
Modifications and Bug Fixes:
New Features/Enhancement:
Improved system stability.
Bug fixes:
1. Fixed the WPA2 Security (KRACKs) Vulnerability.
2. Fixed the bug that can’t obtain correct IP in some situation.
|
|
|
TL-WA850RE(US)_V2_160517
|
|
Published Date: 2016-09-18
|
Language: English
|
File Size: 3.72 MB
|
|
Modifications and Bug Fixes:
New Features/Enhancement：
1. Added the language selection menu in the up right corner.
2. The default SSID has been changed to TP-LINK_WA850RE.
3. Added Power schedule function and Wi-Fi coverage control function.
4. Added the Access Point mode, which means the device can transform your existing wired network to a wireless network.
5. The popups function is added, which means a web UI of the device would automatically pop out the first time you configure it.
Notes:
For TL-WA850RE(US)2.0
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）¿Cómo encontrar la versión de hardware en un dispositivo de TP-Link?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(EU)_V7_200923
|
|
Fecha de Publicación: 2020-10-19
|
Idioma: Multi-language
|
Tamaño de Archivo: 1.74 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability and performance of the device.
2. Fixed some bugs
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(EU)_V7_200731
|
|
Fecha de Publicación: 2020-08-17
|
Idioma: Multi-language
|
Tamaño de Archivo: 1.74 MB
|
|
Modification and bug fixes:
1. Fixed the bug that some devices cannot access Internet in some situations.
2. Fixed the bug that some main router may restart when the repeater connects to it.
3. Fixed the bug of having difficulty in connecting to hidden SSID.
4. Fixed the security issue of logging in to the web UI causes a reset of the device.
5. Optimized total performance.
|
|
|
TL-WA850RE(EU)_V7_200514
|
|
Fecha de Publicación: 2020-05-25
|
Idioma: Multi-language
|
Tamaño de Archivo: 1.60 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability of device.
Notes:
1. For TL-WA850RE V7.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(EU)_V6_190731
|
|
Published Date: 2019-08-29
|
Language: Multi-language
|
File Size: 4.16 MB
|
|
Modifications and Bug Fixes:
1. Optimized the login function.
2. Optimized the display of DNS.
3. Improved the stability of device.
Notes:
1. For TL-WA850RE V6.0
|
|
|
TL-WA850RE(EU)_V6_190422
|
|
Published Date: 2019-08-27
|
Language: Multi-language
|
File Size: 3.77 MB
|
|
1. Fixed the problem that Tether may crash when change LED schedule on the app side.
|
|
|
TL-WA850RE(EU)_V6_181108
|
|
Published Date: 2018-11-16
|
Language: Multi-language
|
File Size: 4.08 MB
|
|
Modifications and Bug Fixes:
1. Optimized the way to access the extender’s web management page via tplinkrepeater.net or www.tplinkrepeater.net
2. Improved wireless network stability.
3. Fixed the connection compatibility issue with a few specific routers.
4. Fixed the display issue of the Internet status in Tether APP.
Notes:
1. For TL-WA850RE 6.0
|
|
Open Source Code voor Programmeerders (GPL)
Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License («LGPL»). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.
U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
ДЛЯ ОБНОВЛЕНИЯ
ВАЖНО: Чтобы избежать проблем при обновлении ПО, пожалуйста, прочитайте следующую информацию по процедуре обновления. Проверьте соответствие аппаратной версии и версии ПО
Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
Проверьте соответствие аппаратной версии и версии ПО. Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
НЕ рекомендуется устанавливать версию ПО, не предназначенную для вашего региона. Нажмите здесь для выбора региона и загрузите наиболее актуальную версию ПО.
- НЕ отключайте питание во время процесса обновления, поскольку это может нанести урон маршрутизатору
- НЕ обновляйте ПО маршрутизатора по Wi-Fi, за исключением тех случаев, когда это является единственно возможным способом.
- Рекомендуется, чтобы все пользователи прекратили использовать все интернет-приложения на компьютере или отключили сетевой кабель от клиентских устройств перед обновлением.
Примечание: Конфигурационные файлы могут быть некорректно установлены на новые версии встроенного ПО, требующие сброса на заводские настройки.
Рекомендации по обновлению ПО: Wi-Fi роутер, Wi-Fi роутер с модемом ADSL2+, Усилитель Wi-Fi сигнала
|
TL-WR850N(RUWISP)v2_3.16.0_0.9.1_up_boot(200826)_2020-08-27_09.02.54
|
|
Дата публикации: 2020-10-02
|
Язык: Английский, Русский
|
Размер файла: 11.58 MB
|
|
Исправления и улучшения:
1. Добавлена поддержка UDP Proxy
2. Удаленный доступ поддерживает подсети
3. Добавлена таблица маршрутизации в веб-интерфейс
4. Добавлены доступные стандарты клиента в Статистику беспроводного режима
5. DHCP опция 43 для TR-069 поддерживает имя пользователя и пароль
6. Удаленный доступ поддерживает обновление прошивки и изменение имени пользователя/пароля
7. Добавлен многоуровневый доступ для Agile config
8. Добавлена поддержка Tether.
Примечание:
Данная прошивка устанавливается через переходную _trans (в архиве).
Данная прошивка сбрасывает пароль на веб-интерфейс.
|
|
|
TL-WR850N(RU_RUWISP)v2_3.16.0_0.9.1_up_boot(190916)_2019-09-17_08.53.53
|
|
Дата публикации: 2019-09-30
|
Язык: Русский
|
Размер файла: 5.70 MB
|
|
Исправления:
1. Исправлена работа мостового соединения, когда отдавался МАС адрес локальной сети.
Для TL-WR850N v2.0 (RU)
|
|
|
TL-WR850N(RU)v2_3.16.0_0.9.1_up_boot(180808)_2018-08-09_11.26.41
|
|
Дата публикации: 2019-04-25
|
Язык: Английский
|
Размер файла: 5.68 MB
|
|
Первый релиз официального ПО
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(UK)_V7_200923
|
|
Published Date: 2020-10-19
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability and performance of the device.
2. Fixed some bugs
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(EU)_V7_200923
|
|
Published Date: 2020-10-19
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability and performance of the device.
2. Fixed some bugs
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(EU)_V7_200731
|
|
Published Date: 2020-08-17
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modification and bug fixes:
1. Fixed the bug that some devices cannot access Internet in some situations.
2. Fixed the bug that some main router may restart when the repeater connects to it.
3. Fixed the bug of having difficulty in connecting to hidden SSID.
4. Fixed the security issue of logging in to the web UI causes a reset of the device.
5. Optimized total performance.
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(US)_V7_200923
|
|
Published Date: 2020-10-19
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability and performance of the device.
2. Fixed some bugs
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(US)_V7_200731
|
|
Published Date: 2020-08-17
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modification and bug fixes:
1. Fixed the bug that some devices cannot access Internet in some situations.
2. Fixed the bug that some main router may restart when the repeater connects to it.
3. Fixed the bug of having difficulty in connecting to hidden SSID.
4. Fixed the security issue of logging in to the web UI causes a reset of the device.
5. Optimized total performance.
|
|
|
TL-WA850RE(US)_V7_200514
|
|
Published Date: 2020-05-25
|
Language: Multi-language
|
File Size: 1.60 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability of device.
Notes:
1. For TL-WA850RE V7.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(US)_V7_200923
|
|
Published Date: 2020-10-19
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability and performance of the device.
2. Fixed some bugs
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(US)_V7_200731
|
|
Published Date: 2020-08-17
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modification and bug fixes:
1. Fixed the bug that some devices cannot access Internet in some situations.
2. Fixed the bug that some main router may restart when the repeater connects to it.
3. Fixed the bug of having difficulty in connecting to hidden SSID.
4. Fixed the security issue of logging in to the web UI causes a reset of the device.
5. Optimized total performance.
|
|
|
TL-WA850RE(US)_V7_200403
|
|
Published Date: 2020-04-22
|
Language: Multi-language
|
File Size: 1.23 MB
|
|
Modifications and Bug Fixes:
1. Improve the stability of device.
Notes:
1. For TL-WA850RE V7.
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(US)_V7_200923
|
|
Published Date: 2020-10-19
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability and performance of the device.
2. Fixed some bugs
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(US)_V7_200731
|
|
Published Date: 2020-08-17
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modification and bug fixes:
1. Fixed the bug that some devices cannot access Internet in some situations.
2. Fixed the bug that some main router may restart when the repeater connects to it.
3. Fixed the bug of having difficulty in connecting to hidden SSID.
4. Fixed the security issue of logging in to the web UI causes a reset of the device.
5. Optimized total performance.
|
|
|
TL-WA850RE(US)_V7_200403
|
|
Published Date: 2020-04-22
|
Language: Multi-language
|
File Size: 1.23 MB
|
|
Modifications and Bug Fixes:
1. Improve the stability of device.
Notes:
1. For TL-WA850RE V7.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-LINK partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence termshere. You receive the GPL source codes of the respective software used in TP-LINK products for direct download and further information, including a list of TP-LINK software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （ Normally V1.x=V1）
It is NOT suggested to upgrade firmware which is not for your region. Please click here to choose your own region and download the most suitable firmware version. ( eg. the firmware of EU and US are different hardware versions)
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- Do NOT upgrade the firmware through wireless connection unless the TP-Link device only has wireless connection.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(EU)_V7_200731
|
|
Published Date: 2020-08-17
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modification and bug fixes:
1. Fixed the bug that some devices cannot access Internet in some situations.
2. Fixed the bug that some main router may restart when the repeater connects to it.
3. Fixed the bug of having difficulty in connecting to hidden SSID.
4. Fixed the security issue of logging in to the web UI causes a reset of the device.
5. Optimized total performance.
|
|
|
TL-WA850RE(EU)_V7_200514
|
|
Published Date: 2020-05-25
|
Language: Multi-language
|
File Size: 1.60 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability of device.
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(EU)_V7_200403
|
|
Published Date: 2020-04-22
|
Language: Multi-language
|
File Size: 1.23 MB
|
|
Modifications and Bug Fixes:
1. Improve the stability of device.
Notes:
1. For TL-WA850RE V7.
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(US)_V4_180409
|
|
Published Date: 2018-05-24
|
Language: Multi-language
|
File Size: 4.06 MB
|
|
Modifications and Bug Fixes
1. Fixed the connection compatibility issue with specific models of routers.
2. Fixed the compatibility issue with some old versions of MacBook.
3. Fixed some display issues of the Web UI.
4. Fixed the issue that specific browsers cannot access the web interface via domain under Windows10 OS.
5. Removed the option of turning off wireless signal.
6. Optimized the scanning process of 2.4GHz wireless.
Notes:
1. For TL-WA850RE(EU/UK/FR/DE/US/AU/BR/ES/AR/KR/JP) V4.
|
|
|
TL-WA850RE(US)_V4_171218
|
|
Published Date: 2017-12-21
|
Language: Multi-language
|
File Size: 4.06MB
|
|
Modifications and Bug Fixes:
New Features/Enhancements:
Improved Online detection method and reduced unnecessary data traffic.
|
|
|
TL-WA850RE(US)_V4_171116
|
|
Published Date: 2017-11-16
|
Language: Multi-language
|
File Size: 4.06 MB
|
|
Modifications and Bug Fixes:
Bug fixes:
Fixed the WPA2 Security (KRACKs) Vulnerability.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）จะค้นหาเวอร์ชั่นฮาร์ดแวร์บนอุปกรณ์ TP-Link ได้อย่างไร
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(US)_V7_200923
|
|
Published Date: 2020-10-19
|
Language: Multi-language
|
File Size: 1.74 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability and performance of the device.
2. Fixed some bugs
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(US)_V7_200514
|
|
Published Date: 2020-05-25
|
Language: Multi-language
|
File Size: 1.60 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability of device.
Notes:
1. For TL-WA850RE V7.
|
|
|
TL-WA850RE(US)_V7_191212
|
|
Published Date: 2019-12-31
|
Language: Multi-language
|
File Size: 1.62 MB
|
|
Modifications and Bug Fixes:
New features/Enhancement:
1. Optimize the Daylight Saving Time function.
2. Improve the stability and performance of device.
Notes:
1. For TL-WA850RE V7.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(UK)_V6_200403
|
|
Published Date: 2020-04-24
|
Language: Multi-language
|
File Size: 4.16 MB
|
|
Modifications and Bug Fixes:
1. Improved the stability of device.
2. Improved the performance of device.
3. Enhanced the security of device.
Notes:
1. For TL-WA850RE V6.
|
|
|
TL-WA850RE(UK)_V6_191206
|
|
Published Date: 2020-01-14
|
Language: English
|
File Size: 3.66 MB
|
|
New features/Enhancements:
1. Added mamual DHCP settings in web-based management page.
2. Improved Smart DHCP feature.
3. Improved compatibility with some devices.
For TL-WA850RE V6.
|
|
|
TL-WA850RE(EU)_V6_190731
|
|
Published Date: 2019-08-29
|
Language: Multi-language
|
File Size: 4.16 MB
|
|
Modifications and Bug Fixes:
1. Optimized the login function.
2. Optimized the display of DNS.
3. Improved the stability of device.
Notes:
1. For TL-WA850RE V6.0
|
|
