Настройка tp-link tl-wr841nd: подключение, wi-fi, интернет, iptv
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841N(UN)_V8_170210
|
|
Published Date: 2017-02-10
|
Language: English
|
File Size: 3.48 MB
|
|
Modifications and Bug Fixes:
New Features/Enhancement:
Optimized the security mechanism.
Notes:
1. For TL-WR841N(UN)_V8.2. It is NOT suggested to upgrade firmware which is not for your region. If this site is not for your region, please click here to choose your own region and download the most suitable firmware version.
|
|
|
TL-WR841N_V8_140724
|
|
Published Date: 2014-07-24
|
Language: English
|
File Size: 3.45 MB
|
|
Modifications and Bug Fixes:
- Improve performance of IGMP module;
- Fixed bug：PPPOE can’t dial up successfully in some special situations.
Notes:
For TL-WR841N V8
|
|
|
TL-WR841N_V8_131107_CA
|
|
Published Date: 2013-11-07
|
Language: English
|
File Size: 3.31 MB
|
|
Notes:
for TL-WR841ND(CA) V8
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Nondiscrimination Statement
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841N(US)_V14_200114
|
|
Published Date: 2020-03-25
|
Language: English
|
File Size: 4.33 MB
|
|
New Features/Enhancement:
1. Optimize load handling;
2. Optimize the acceleration function;
3. Optimize the NTP list;
4. Supported the IPv6 auto;
5. Add LED control;
6. Add WAN link status display.
|
|
|
TL-WR841N(US)_V14_191119
|
|
Published Date: 2019-11-20
|
Language: English
|
File Size: 4.46 MB
|
|
Modifications and Bug Fixes:
1.Improve the stability of device.
2.Fix buffer overflow vulnerability discovered by Trend Micro ZDI to increase security.
Notes:
For TL-WR841(US) V14
|
|
|
TL-WR841N(US)_V14_180319
|
|
Published Date: 2018-04-03
|
Language: English
|
File Size: 4.23 MB
|
|
Notes:
First firmware released for TL-WR841 US v14
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841N(US)_V9_150401
|
|
Published Date: 2015-04-01
|
Language: English
|
File Size: 3.13 MB
|
|
Notes:
1.For TL-WR841N(US)9.0
2.If you’re in a region out of United States, please do not upgrade US firmware.Click here to choose your region for the most suitable firmware.
|
|
|
TL-WR841N_V9_150310
|
|
Published Date: 2015-03-10
|
Language: English
|
File Size: 3.09 MB
|
|
Modifications and Bug Fixes:
Bug Fixed：
1.Fixed the directory traversal security bug;
2.Dyndns will display «succeed»even with the wrong username and password.
Notes:
For TL-WR841N V9.0 and TL-WR841ND V9.0
|
|
|
TL-WR841N_V9_150104
|
|
Published Date: 2015-01-04
|
Language: English
|
File Size: 3.09 MB
|
|
Modifications and Bug Fixes:
- New Features/Enhancement：(1)Added the support for TP-LINK Tether 2.0 Mobile App;
-
Bug Fixed：(1)Fixed the bug that when using WDS function,the PC may not get IP address sometime in three address WDS mode.
Notes:
For TL-WR841ND V9The configuration will be lost after upgrading.To avoid this issue please backup the configuration before upgrading,then restore the router by this configuration file.
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841ND_v7_120221_MY
|
|
Published Date: 2012-02-28
|
Language: English
|
File Size: 3 MB
|
|
Notes:
For TL-WR841N/TL-WR841ND hardware version 7 only.Supports Unifi users and general users.
|
|
|
TL-WR841ND_v7_120201
|
|
Published Date: 2012-02-07
|
Language: English
|
File Size: 3.21 MB
|
|
Modifications and Bug Fixes:
- Fix the bug that cannot connect to the PPTP/L2TP server successfully.
- Improve the dyndns function.
Notes:
For TL-WR841N & TL-WR841ND
|
|
|
TL-WR841ND_V7_111228
|
|
Published Date: 2012-01-11
|
Language: English
|
File Size: 3.21 MB
|
|
Modifications and Bug Fixes:
- Add the function of IP conflict detection between LAN and WAN.
- Add the function that login the web page via domain name http://tplinklogin.net.
- Add the function of day-light saving time.
- Add MAC clone step in the Quick Setup configuration.
- Add the function of supporting different internal and external port in Virtual Server.
- Change the default LAN IP address to 192.168.0.1
Notes:
For TL-WR841ND V7
|
|
ДЛЯ ОБНОВЛЕНИЯ
ВАЖНО: Чтобы избежать проблем при обновлении ПО, пожалуйста, прочитайте следующую информацию по процедуре обновления. Проверьте соответствие аппаратной версии и версии ПО
Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
Проверьте соответствие аппаратной версии и версии ПО. Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
НЕ рекомендуется устанавливать версию ПО, не предназначенную для вашего региона. Нажмите здесь для выбора региона и загрузите наиболее актуальную версию ПО.
- НЕ отключайте питание во время процесса обновления, поскольку это может нанести урон маршрутизатору
- НЕ обновляйте ПО маршрутизатора по Wi-Fi, за исключением тех случаев, когда это является единственно возможным способом.
- Рекомендуется, чтобы все пользователи прекратили использовать все интернет-приложения на компьютере или отключили сетевой кабель от клиентских устройств перед обновлением.
Примечание: Конфигурационные файлы могут быть некорректно установлены на новые версии встроенного ПО, требующие сброса на заводские настройки.
Рекомендации по обновлению ПО: Wi-Fi роутер, Wi-Fi роутер с модемом ADSL2+, Усилитель Wi-Fi сигнала
|
TL-WR841N(RU)_V13_191015
|
|
Дата публикации: 2019-12-20
|
Язык: Русский
|
Размер файла: 6.11 MB
|
|
Modifications and Bug Fixes:
1. Optimized system stability and reliability.
2. Added LED Control function.
3. Supported HTTPS web management.
4. Optimized PPPOE module which could provide more stable connection.
5. Improved stability of L2TP and PPTP connection.
6. Fixed some security issues.
Notes:
For TL-WR841N RU v13.
|
|
|
TL-WR841N(RU)_V13_180330
|
|
Дата публикации: 2018-05-21
|
Язык: Русский
|
Размер файла: 4.58 MB
|
|
Исправления и улучшения:
1. Исправлена ошибка, при которой при определённых условиях не работала функция MAC Clone.
2. Исправлена ошибка, при которой некоторые беспроводные устройства, подключаемые к основному роутеру в режиме RE, не могли пропинговать основной роутер.
3. Исправлена ошибка, при которой устройства Android 7.0 не могли выходить в интернет при нестабильной работе сети.
4. Исправлена ошибка, при которой при использовании режима повторителя (repeater)в определённых условиях не удавалось войти в веб-интерфейс управления.
Новые функции и улучшения:
1. Поддержка SNMP и мониторинга пропускной способности (Throughput Monitor) в режиме точки доступа (AP mode).
2. Поддержка перезагрузки по расписанию.
Примечание:
Настройки вашего устройства будут сброшены после перехода на данное ПО. Вам потребуется выполнить настройку устройства повторно – просьба не восстанавливать файл резервной копии настроек.
|
|
|
TL-WR841N(RU)_V13_170713
|
|
Дата публикации: 2017-07-13
|
Язык: Русский
|
Размер файла: 4.50 MB
|
|
Modifications and Bug Fixes:
Новые функции/улучшения:
1. Добавлены режимы работы Точка доступа/Усилитель сигнала/WISP.
2. Обновлен список провайдеров в мастере быстрой настройки.
3. Установлена версия IGMP V3 по умолчанию.
4. Исправлена проблема маршрутизации для оператора Зеленая точка.
5. Исправлена проблема долгого переподключения PPTP/L2TP.
6. Исправлена проблема рассыпания IPTV в некоторых условиях.
Notes:
1. Для TL-WR841(RU)_V13.
2. Ваши настройки будут утеряны после обновления.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
ДЛЯ ОБНОВЛЕНИЯ
ВАЖНО: Чтобы избежать проблем при обновлении ПО, пожалуйста, прочитайте следующую информацию по процедуре обновления. Проверьте соответствие аппаратной версии и версии ПО
Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
Проверьте соответствие аппаратной версии и версии ПО. Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
НЕ рекомендуется устанавливать версию ПО, не предназначенную для вашего региона. Нажмите здесь для выбора региона и загрузите наиболее актуальную версию ПО.
- НЕ отключайте питание во время процесса обновления, поскольку это может нанести урон маршрутизатору
- НЕ обновляйте ПО маршрутизатора по Wi-Fi, за исключением тех случаев, когда это является единственно возможным способом.
- Рекомендуется, чтобы все пользователи прекратили использовать все интернет-приложения на компьютере или отключили сетевой кабель от клиентских устройств перед обновлением.
|
TL-WR841ND_V5_100929
|
|
Дата публикации: 2010-09-29
|
Язык: Английский
|
Размер файла: 2.853 MB
|
|
Modifications and Bug Fixes:
- Inprove the performance of PPTP/L2TP;
- Add the support of RTSP Pass-through;
- Inprove the performance of VPN Passthough;
- Add the display of PPPoE/PPTP/L2TP in Status page;
- Add support of DHCP option 249;
- Add support of Domain Name as NTP server, and support Offset Time Zone;
- Change the judgement of Static routing rule;
- Solve the problem that if the configuration file is larger than 40KB, Only 0KB is saved;
- Add the support of empty username and password authentication of PPPoE/PPTP/L2TP;
- The WAN IP and Gateway can be in different network segments, include static IP and DHCP;
- Solve the problem that UPNP entries disappear 12 hours later;
- Some web page display modifications.
Notes:
For TL-WR841ND V5
|
|
|
TL-WR841ND_V5_100603
|
|
Дата публикации: 2010-06-03
|
Язык: Английский
|
Размер файла: 2.707 MB
|
|
Modifications and Bug Fixes:
- Add IGMP function support;
- Add support to Gate Way address end with .255 when us Static IP;
- Add support to configure static route item on the second connection.
Notes:
For TL-WR841ND
|
|
|
TL-WR841ND_V5_100408
|
|
Дата публикации: 2010-04-08
|
Язык: Английский
|
Размер файла: 2.726 MB
|
|
Modifications and Bug Fixes:
- Add Dual Access function.
- Improve L2TP performance.
- Display WDS status.
Notes:
For TL-WR841ND
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841ND(UN)_V8_170210
|
|
Published Date: 2017-02-10
|
Language: English
|
File Size: 3.48 MB
|
|
Modifications and Bug Fixes:
New Features/Enhancement:
Optimized the security mechanism.
Notes:
1. For TL-WR841ND(UN)_V8.2. It is NOT suggested to upgrade firmware which is not for your region. If this site is not for your region, please click here to choose your own region and download the most suitable firmware version.
|
|
|
TL-WR841ND_V8_140724
|
|
Published Date: 2014-07-24
|
Language: English
|
File Size: 3.45 MB
|
|
Modifications and Bug Fixes:
- Improve performance of IGMP module;
- Fixed bug：PPPOE can’t dial up successfully in some special situations.
Notes:
For TL-WR841ND V8
|
|
|
TL-WR841ND_V8_130506
|
|
Published Date: 2013-05-06
|
Language: English
|
File Size: 3.35 MB
|
|
Modifications and Bug Fixes:
- Improved WAN-Auto-Detect policy and optimized Quick Setup process;
- Fixed some vulnerabilities and improved security;
- Added auto WDS function.
Notes:
For TL-WR841ND V8
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841ND_V9_150310
|
|
Published Date: 2015-03-10
|
Language: English
|
File Size: 3.09 MB
|
|
Modifications and Bug Fixes:
Bug Fixed：
1.Fixed the directory traversal security bug;
2.Dyndns will display «succeed»even with the wrong username and password.
Notes:
For TL-WR841N V9.0 and TL-WR841ND V9.0
|
|
|
TL-WR841ND_V9_150104
|
|
Published Date: 2015-01-04
|
Language: English
|
File Size: 3.09 MB
|
|
Modifications and Bug Fixes:
-
New Features/Enhancement：(1)Added the support for TP-LINK Tether 2.0 Mobile App;
-
Bug Fixed：(1)Fixed the bug that when using WDS function,the PC may not get IP address sometime in three address WDS mode.
Notes:
For TL-WR841ND V9The configuration will be lost after upgrading.To avoid this issue please backup the configuration before upgrading,then restore the router by this configuration file.
|
|
|
TL-WR841ND_V9_141013
|
|
Published Date: 2014-10-13
|
Language: English
|
File Size: 3.64 MB
|
|
Modifications and Bug Fixes:
- Added session mechanism to improve security;
- Added a new login domain “tplinkwifi.net” for web-based management(Compatible with old login domain name:tplinklogin.net);
- Improved the performance of wireless;
- Improved the numbers of maximum wireless clients to 31;
- Fixed bugs：(1)PPPOE can’t dial up successfully in some special situations ; (2)Can’t watch RTSP TV in some special situations.
Notes:
For TL-WR841ND(UN) V9Since the security mechanism of the new firmware have improved,the configuration file of the old firmware can not be used in the new firmware.
|
|
